|
The Rocker Zbeam is a speaker rigging device used to control pan and tilt for line arrays in portable applications, or any other two hoist supported speaker cluster. The upper two thirds of Rocker Zbeams are standard. The lower bottom tube is built to match the center to center distance of the two support points on a specified loudspeaker system.
The Rocker Zbeam™ is the new state of the art for arena rigging of line arrays. It also works great for two motor rigs of conventional trapezoidal enclosures. It is protected under three pending patents, and is the culmination of years of research and development.
With conventional arena rigging techniques, a two motor rig is usually suspended by one dead hang motor point, and a carefully bridled second point. The aim of the cluster, and therefore the accuracy of the audio coverage, is dependent on the accuracy of the bridled rigging point. In order to achieve the necessary accuracy, the bridled point may need to be rehung or adjusted several times, delaying the completion of the load in. When using a Rocker Zbeam™, only two dead hang points are required. Or if bridles must be used, the accuracy of the bridles is much less important. In either case, the cluster can be quickly rotated to achieve the proper horizontal (pan) angle. The result is an expected increase by a factor of five for both speed and accuracy.
| Product Code |
Product Description |
ship
wt |
net
wt |
pkg
units |
| RZB1-2T |
Rocker Zbeam kit with two Rocker Zbeams, pull up guides, instruction manual, and matching cart. Specify loudspeaker brand and model. |
|
0 lbs |
1 |
|
| RZB1-2T-KF760 |
Rocker Zbeam for use with the EAW KF760 model loudspeaker. Load support points are fixed at 39 inches apart. Includes two Rocker Zbeams, pull up guides, instruction manual, and 45 inch x 30 inch matching cart. |
|
0 lbs |
1 |
|
| RZB1-2T-VDOSC |
Rocker Zbeam kit for use with the VDOSC model loudspeaker. Load support points are fixed at 42.25 inches apart. Includes two Rocker Zbeams, pull up guides, instruction manual, and 48 inch x 30 inch matching cart. |
|
0 lbs |
1 |
|
| RZB1-2T-Vertec |
Rocker Zbeam kit for use with the JBL Vertec model loudspeaker. Load support points are fixed at 36 inches apart. Includes two Rocker Zbeams, pull up guides, instruction manual, and 45 inch x 30 inch matching cart. |
|
0 lbs |
1 |
|
| RZB1-CK |
Caster Kit for adding 5th and 6th casters to a standard Rocker Zbeam cart. Includes two swivel casters and all mounting hardware required. The standard cart has 4 casters set at the maximum width for stability in arena touring environments. The Caster Kit allows the cart to be safely used with narrow ramps on straight body rental trucks. |
|
0 lbs |
1 |
|
|
|
