Rigging Beam Clamp		RBC
< Previous Item		Next Item >
Click on photo to enlarge
Product Description
Rigging Beam Clamps are good for simple attachment to the bottom of a level I beam for loads up to 5 tons. They are commonly used to support 1 ton chain hoists when the top of an I beam is covered over by architectural material, thereby blocking the use of a sling over the top of the beam. These clamps are designed for flat and level beam applications only. Designed for standard S and wide flange W beams. For most applications, chain slings will have a lower cost than beam clamps. Product Code Product Description ship wt net wt pkg units RBC-1 Used for level I beam with vertical loading. Fits I beams with a flange width from 2.95 to 9.05 inches. Maximum flange thickness is 0.79 inches. WLL = 2200 pounds n/a 9 lbs 1 RBC-2 Used for level I beam with vertical loading. Fits I beams with a flange width from 2.95 to 9.05 inches. Maximum flange thickness is 0.79 inches. WLL = 4400 pounds n/a 11 lbs 1 RBC-3 Used for level I beam with vertical loading. Fits I beams with a flange width from 3.15 to 12.6 inches. Maximum flange thickness is 1.34 inches. WLL = 6600 pounds n/a 21 lbs 1 RBC-5 Used for level I beam with vertical loading. Fits I beams with a flange width from 3.15 to 12.6 inches. Maximum flange thickness is 1.34 inches. WLL = 11000 pounds n/a 25 lbs 1
Additional Information
Related Items	RCS: Rigging Chain Sling kits, RCC: Rigging Chain Choker kits